After fixing the nails, wipe off the excess oil on the nails to make the nails more docile. Then apply a layer of primer and place it in a randomly distributed phototherapy machine for 30 seconds. 2 Apply PG glue after applying PG glue, and you can choose two colors. One is pure white and the other is pearl white. The reason for using these two colors is that using a base color of other colors may cause chromatic aberration.
(Pure white primer) (Pearl white glue) 3 After applying the protective glue to the PG glue, apply a layer of protective glue around the nails, especially the nail groove part should be carefully covered. Don't be afraid to paint it. It's hard to unload. After the protective glue is applied, it will be the same as the film. It will fall off after a light touch~ Apply the protective glue and wait for it to dry naturally.
After the print pattern is completed and the entire nail polish is finished, the phototherapy lamp is easily dried as long as the painted finger is placed in the nail machine. Then choose the nail art pattern, and you can print the pattern of one nail in about 40 seconds.
After applying the sealant, put the printed nails into the phototherapy machine for 2 minutes. In order to be more durable, you need to apply a sealant. According to the color of the printed pattern, the lighting process is completed in 1-2 minutes.